Who Builds a House From Survey to Final Clean
Surveyor, excavator, mason, framer, general contractor, inspector and cleaner, in order of arrival, with what each settles and the BLS wage and outlook where they apply.

Week 1 is a digger and a set of stakes. Week 20 is a closing. Between them, on one published timeline, a different crew owns almost every stretch, and each one inherits a decision someone else made and can no longer take back.
That is the useful thing to know if you are an owner wondering whom to call when a date slips, a remodeler finding where your scope sits in the chain, or a tradesperson whose work rests on someone else's. The order below follows The Plan Collection's week-by-week timeline, starting from bare ground.
The surveyor and the engineers
Before there is a hole, there are people who read the ground. Architectural Designs says the early stage of surveys, permits and site prep may involve the builder, owner, surveyor, engineer and site contractor. What the surveyor does, from deed research to staked corners, is in What a Land Surveyor Does Before You Build, and which engineer a house needs is in Structural Engineer vs Civil Engineer for a House.
The design team prepares the grading, structural and foundation plans, and ROST Architects says rough grading follows those drawings. The architect typically shepherds plan check and approvals, and only then does the contractor pull permits. What the surveyor and engineers leave behind is a footprint marked in stakes: the first moment anyone can stand where the kitchen will be.
Excavation and footings
The excavator clears the lot and digs to the lines the stakes mark. Week 1 on the timeline covers excavation and footings together, and then everything stops for the inspector. Ahead of the pour, ROST Architects says, the building inspector checks footing depth, soil compaction and foundation design against the drawings and code. A footing that fails is cheap to fix today and very expensive to fix under a house.
Excavation Crew Site Prep Before the Foundation follows the crew from the stakes to a ready pad, and What Inspectors Check at the Footing Before the Pour covers that first gate.
Concrete and masonry
The foundation fills weeks 2 and 3. BLS describes cement masons and concrete finishers as the people who place and finish the concrete, with rebar workers setting the reinforcing mesh on big pours like foundations. The structural engineer and architect typically come out to watch.
Once the concrete cures, the foundation is inspected, and framing waits for the result. Masonry workers had a median annual wage of $58,270 in May 2025. BLS projects 1 percent employment growth from 2025 to 2035, slower than average, with about 18,400 openings a year. Concrete finishers are the bulk of the field: 204,800 of its 277,700 jobs in 2025.
Framing and the rough-in trades
Weeks 4 and 5 are when a lot starts to look like a house. Behind the framers come the plumbers, electricians and carpenters, and JC Design Build notes that most general contractors bring in subcontractors for exactly that work.
After framing, the building inspector and structural engineer are usually called in. Separate plumbing, electrical and mechanical inspections follow before drywall hides the systems. Wherever the electrician ran the wire is where it stays, which is why the inspection comes before the paint. Every stage of those checks is in What a Home Inspector Checks Before the Walls Close, and how a framed shell becomes trim, stairs and doors is in Finish Carpentry After Framing.
The general contractor
Someone has to decide who arrives on Monday. BLS says construction managers, often called general contractors, plan, coordinate, budget and supervise projects from start to finish, selecting and scheduling subcontractors and making sure the work meets building and safety codes. JC Design Build puts the building phase in similar terms: labor, subcontractor schedules and site logistics. Whether that someone is a general contractor, a design-build firm or a construction manager changes who signs what, as General Contractor vs Design-Build vs Construction Manager lays out.
Construction managers had a median annual wage of $114,990 in May 2025, and BLS projects 9 percent growth from 2025 to 2035, much faster than average. They held about 609,100 jobs in 2025, and 38% were self-employed.
The inspector
The inspector is the one person on a site paid to say not yet, and everyone on the crew learns to listen for it. The job is a run of gates: footings, foundation, framing, then plumbing, electrical and mechanical. Each decides whether the next trade may start.
The last gate is at the end. At final inspection the local building department reviews the home and may issue a Certificate of Occupancy. The timeline puts that in week 18.
The cleaner
Interior clean up sits in week 16, ahead of final inspection. BLS describes laborers and helpers as the workers who clean and prepare sites, clearing debris and hazards, and says the occupation has one of the highest injury and illness rates. Median pay was $46,680 in May 2025, and BLS projects 6 percent growth from 2025 to 2035, faster than average.
Then comes the walk-through. Near the end, ROST Architects says, the team and the owners make a punch list of what is left to finish. What the last crew does before that walk-through is in Post-Construction Cleaning Before the Final Walk-Through. Week 20, closing, is the last line on the calendar, and the last thing on the list is usually in someone's hand.
Every Crew, One Page Each
- What a Land Surveyor Does Before You Build: deed research to staked corners.
- Structural Engineer vs Civil Engineer for a House: the ground, or what rises from it, and who to call for each.
- Excavation Crew Site Prep Before the Foundation: from the surveyor's stakes to a ready foundation pad.
- What Inspectors Check at the Footing Before the Pour: what is checked while the steel is still in view.
- Finish Carpentry After Framing: trim, stair railings and doors after the framers.
- General Contractor vs Design-Build vs Construction Manager: who signs which contract and how the price is set.
- What a Home Inspector Checks Before the Walls Close: each stage inspected before the next one hides it.
- Post-Construction Cleaning Before the Final Walk-Through: the last crew on site, before the first walk-through.
Remodeling rather than building new? Home Renovation Order of Trades, Plumber to Cleaner starts at the open wall.
Highlights
Who is on a house build, in order?
The surveyor and engineers come first, then excavation, concrete and masonry, and framing with the rough-in trades. A general contractor coordinates throughout, and the inspector signs off at each gate.
What does a general contractor earn?
BLS reports construction managers had a median annual wage of $114,990 in May 2025. It projects 9 percent growth from 2025 to 2035.
What does the inspector check before concrete is poured?
The building inspector checks footing depth, soil compaction and foundation design against drawings and code. The foundation is inspected again after curing.
Sources
- Construction Managers : Occupational Outlook Handbook: : U.S. Bureau of Labor Statistics
- Masonry Workers : Occupational Outlook Handbook: : U.S. Bureau of Labor Statistics
- Construction Laborers and Helpers : Occupational Outlook Handbook: : U.S. Bureau of Labor Statistics
- How Long Does It Take to Build a House? Timeline & Steps
- Typical Custom Home Construction Process — ROST ARCHITECTS
- Your Guide to the Home Building Process: 10 Steps
- Design-Build vs. General Contractor: What’s the Difference and Why Does It Matter - Jackson Carter Design Build
