About
The Letter

LAMiamiNY

Outdoor Living

Fence Installation Permits and Property Lines

Before you hire a fence installer, find your boundary, the height rule and the permit answer. New York's rules are laid out, and Los Angeles starts with a zoning lookup.

Fence Permit and Property Line Checklist. Sunlit wooden picket fence at the edge of a backyard lawn, with a weathered tree stump and green shrubs growing in front of it.
Photo: ParentingPatch, CC BY-SA 3.0, via Wikimedia Commons

Get the boundary surveyed, and learn your local height rule, before anyone gives you a quote. A fence is priced by the linear foot, so the line sets the footage and the footage sets the price. It is also the one backyard job that can be built flawlessly and still be wrong: the fence company Ergeon says building without proper permits or breaking a setback can bring fines, penalties and a forced removal. Nobody wants to pay for the same fence twice.

Steps Before You Hire a Fence Installer

Here is the order that keeps surprises out of the job.

  1. Hire a licensed land surveyor to mark your line. New York's Department of Buildings recommends it, and Ergeon calls a survey the most reliable source for locating property lines.
  2. Call the utility or your local government and ask about easements. Ergeon says a fence cannot block one.
  3. Ask what your setback is: the minimum distance a new fence must keep from lines, streets, sidewalks, structures or easements.
  4. Look up the height limit for your address. The table below shows where to start.
  5. Ask your building department whether the fence needs a permit, and keep the answer.
  6. If you have a homeowners association, ask for its fence rules, which Ergeon says can be stricter than the city's. If your house is a landmark in New York, you also need the Landmarks Preservation Commission.
  7. Only then collect quotes, and hand every installer the same surveyed line and height so the prices compare.

Fence Height and Permit Rules in New York and Los Angeles

| City | Height | Permit |
|---|---|---|
| New York | Up to 10 feet under the Building Code, but zoning is tighter: 4 feet in a residential front yard and 6 feet on the side of a residential corner lot. | Not required for 6 feet or less on a one- or two-family home. Other heights need a PW1 application. |
| Los Angeles | Depends on the zoning of your lot. Look it up in ZIMAS. | Simple projects on the LADBS express list can get a permit online through PermitLA. Others go to plan review. |

In New York, the Department of Buildings also says homeowners may install their own fencing, and a PW1 form can be filed through DOB NOW or at a borough office.

In Los Angeles, ZIMAS shows the zoning that determines a property's building regulations, so it is the first stop for a height answer. LADBS warns that work that breaks local codes may be penalized and stopped, and its enforcement team answers complaints about work without permits and about a missing gate or fence around a pool. Miami-Dade is not covered here, so ask the county's building office the same two questions: height and permit.

Fence Materials and Choosing an Installer

The usual choices are chain link, masonry, metal, vinyl and wood, according to This Old House. New York's building department lists wood, plastic, brick and chain link for privacy fencing.

Climate is the factor people forget. Fixr says vinyl can crack in deep cold and soften and warp in intense heat, so it does not suit every region. Cedar needs an occasional refinish, and metal should be checked for corrosion, This Old House says.

On price, Fixr puts installed fences at $12 to $35 per linear foot depending on material, which is why your surveyed footage matters to the installer. In New York, confirm the installer is a licensed Home Improvement Contractor by calling 311 or using the city's license check.

Do You Need a Fence at All

One last detail from New York's 311 service: fences are not required between residential properties. Whether to build is your call.

Highlights

Do I need a permit for a fence in New York?

Not for a fence of 6 feet or less on a one- or two-family home, according to the Department of Buildings. Other heights need a PW1 application, and landmarked properties need Landmarks Preservation Commission approval.

How do I find my property line before building a fence?

Hire a licensed land surveyor. New York's Department of Buildings recommends it, and Ergeon calls a survey the most reliable source.

How do I find the fence height limit in Los Angeles?

Look up your address in ZIMAS, which shows the zoning that determines a property's building regulations.

More Stories

From LA Miami NY

A cabana daybed beside a rooftop infinity pool high above a curving bay, beaches and a city skyline
The Letter

Each new story from LA Miami NY, sent to your inbox when it is published. Nothing else. Leave any time.