About
The Letter

LAMiamiNY

Design

Custom Upholstery Lead Times and the Makers Behind a Room

Furniture maker, upholsterer, drapery workroom, rug maker, framer and art consultant: what each needs from you, and why the sofa sets the calendar.

Custom Upholstery Lead Times Explained. A cream slipcovered three-seat sofa with blue patterned cushions beside a sunny window in a living room.
Photo: DesignFolly.com, CC BY-SA 2.0, via Flickr

Confirm the yardage with the upholsterer before you order a single yard of fabric. House Fabric's guide gives that advice for a practical reason: the clock on a custom sofa does not always start when you call. Some shops begin work about six weeks after materials arrive, and Bunny Williams Home asks for 10 weeks of production from material receipt, with finished pieces then arriving by freight within 3 to 4 weeks. A wrong yardage means a second fabric order and a restarted wait.

House Fabric also says an upholsterer's queue typically runs 2 to 6 weeks, longer in busy seasons such as before the holidays. A sofa keeps its own calendar, and every other maker in the room works around it. They arrive in this order: furniture maker, upholsterer, drapery workroom, rug maker, framer, art consultant.

Custom Furniture Makers

A custom sofa can involve a millworker for the frame plus an upholstery workroom, with the designer mediating between the two. 4Dbiz advises getting written client approval of samples and shop drawings before any custom order goes in. The frame is the part nobody sees: Bunny Williams Home starts its upholstery with a kiln-dried solid maple frame.

Location matters too. For headboards, 4Dbiz recommends a workroom near the project site to cut shipping cost and the risk of damage in transit. Commissioning a piece from a furniture maker, from the first tape on the floor to delivery, is in How to Commission Custom Furniture, Step by Step.

Custom Upholstery Lead Times

Marks & Tavano Workroom in the South Bronx started in 1998 and, according to Cottages & Gardens, employs 10 craftspeople in a 5,000-square-foot atelier. Arriving fabric is machine-inspected for flaws and measured for yardage before it is cut and passed to the right craftsperson. Many Bunny Williams Home designs use eight-way hand-tied springs.

The sources give the sequence for a custom piece like this:

  1. The estimate and consultation take 3 to 7 days, according to House Fabric.
  2. Confirm yardage with the upholsterer before ordering fabric. Customers sending their own fabric will find minimum yardage on each Bunny Williams Home product page, and it may vary for repeat patterns.
  3. Ask for a cut for approval, which 4Dbiz recommends so the dye lot matches the sample you were shown.
  4. Wait out the shop's queue, typically 2 to 6 weeks.
  5. Production and freight follow: 10 weeks from material receipt, then 3 to 4 weeks, per Bunny Williams Home.

House Fabric puts a whole upholstery project at 6 to 12 weeks, sometimes more. One more detail from 4Dbiz: cushion fabric is specified by the square inch, drapery fabric by width. When the frame you already own is worth keeping, Reupholstering a Sofa Cost, Frame Test and Fabric Choice sets the quote beside a new sofa.

Drapery Workroom

Jill Ballew founded High Country Drapery Designs in 2015. Business of Home reported on October 23, 2026 that about 75 percent of its business is with interior designers and 25 percent with homeowners. Its sales reps meet designers on site, take measurements, provide yardages and bring samples, and designers usually keep the fabric sale.

Before installation, the crew unboxes hardware, inspects the fabrics and hangs the draperies on high lifts to verify lengths and widths. On a Knoxville project the workroom coordinated with the builder and the A/V contractor before drywall, for blocking and wiring of motorized shades.

From 4Dbiz, the measurements to bring: ceiling height in at least three places where drapery will hang, because heights can vary, and the hem allowance from the workroom, so you know how much length adjustment is possible. More on the measuring, workroom by workroom, is in Who Measures Custom Drapery Before the First Cut.

Custom Rugs

For custom rugs, 4Dbiz says the key considerations are pile height and binding type, and pile height must clear a door swing. A rug that looks right on a floor plan can still catch the bottom of a door. Sizing a rug to a room, and reading its back, is in How to Size a Rug and Read the Back.

Picture Framing

A framing guide from Custom Picture Frames says conservation framing uses archival, lignin-free mats and reversible mounting, and lasts 100+ years, against yellowing of standard framing in 10 to 20 years. The guide says conservation materials cost 20 to 40 percent more, and that the framing is required for original artwork, limited editions and archival photographs. Temporary displays of 1 to 5 years can use standard framing. What to ask for at the framer's counter is in What a Custom Framer Does and What to Ask For.

Museum-standard mounting is reversible, using methods such as wheat starch paste or archival photo corners.

Art Consultants

TurningArt says art consultants typically charge a commission of about 5% to 20% of art cost, or hourly or flat fees for extensive projects, and advises that payment terms be defined in a contract before the project starts. The Marshall Gallery adds that consultants work with interior designers and other contractors to build a cohesive look.

TurningArt describes the job in order:

  1. A meeting on budget and vision.
  2. An analysis of the floor plans.
  3. A decision on placement.
  4. Oversight of installation.

The consultant's work at home, and the hanging height to remember, is in Art Consultant at Home and the 57 Inch Hanging Rule.

Makers Named in This Guide

The Credits, firm by firm:

  • Marks & Tavano Workroom, South Bronx: upholstery, started in 1998
  • Bunny Williams Home: custom upholstery on kiln-dried solid maple frames
  • High Country Drapery Designs, founded by Jill Ballew in 2015: draperies and motorized shades, including a Knoxville project
  • Custom Picture Frames: conservation framing standards
  • TurningArt: art consulting

At Marks & Tavano, a finished piece gets one last look from Tavano or Boodoo before it is packaged for shipping.

Every Maker, One Page Each

Choosing the designer before the makers? Architect or Interior Designer Who to Hire First sets out the order.

Highlights

How long does custom upholstery take?

House Fabric puts a typical project at 6 to 12 weeks, sometimes more, and some shops start about six weeks after materials arrive. Bunny Williams Home asks for 10 weeks of production from material receipt, plus 3 to 4 weeks of freight.

What does a drapery workroom need from you?

4Dbiz advises ceiling height measured in at least three places and the workroom's hem allowance, so you know how much length can be adjusted. Drapery fabric is specified by width.

How much do art consultants charge?

TurningArt says they typically charge a commission of about 5% to 20% of art cost, or hourly or flat fees for extensive projects, with terms defined in a contract first.

More Stories

From LA Miami NY

A cabana daybed beside a rooftop infinity pool high above a curving bay, beaches and a city skyline
The Letter

Each new story from LA Miami NY, sent to your inbox when it is published. Nothing else. Leave any time.