What a Custom Framer Does and What to Ask For
A framer is one of the last hands behind a home, and the layers they choose decide how long your art and photos last. Here is what to ask for at the counter.
The frame is the part guests see. The mat, glazing, hinges and backing are the part that does the work, and they are what to ask about. Take this list to the counter:
- Ask for conservation framing by name. Passion4Art says it is also called archival or museum-quality framing, and Frame Destination says shops use conservation, preservation and archival loosely, so ask what is actually in the package.
- Ask for acid-free, lignin-free mat board, and for every step of the mounting to be reversible.
- Ask what percentage of UV the glazing blocks, and how the shop measures it. The sources below do not all draw the line in the same place.
- Ask how the piece will be attached: hinges or photo corners, never masking tape or rubber cement.
- Ask what goes behind it. Cardboard backing is on the avoid list.
- Be ready to say how long the piece should last, where it will hang and how much natural light the room gets. Glazing maker Tru Vue suggests framers ask exactly that.
A house gets its walls from the drywall crew and its paint from the painters. The framer is who decides whether what goes on those walls survives them.
What a Custom Framer Does
A framer is a specifier as much as a carpenter. They choose a stack of materials that sits against your art for years, then assemble it so each layer protects the next. The Conservation Center describes framing as preventative care for items that are hardest or impossible to replace.
The Florida Department of State, writing about archival preservation, lays out the basic build: a back mat, the artwork and a windowed inner mat, then a backing board, optionally a decorative outer mat, and UV-protective glass or acrylic.
Choosing a Mat
The mat is the border, and it is where cheap framing fails first. The Conservation Center says non-archival mats and mounts can transfer acid, leaving paper discolored and brittle, and that the cardboard in cheap pre-made frames is highly acidic.
Passion4Art describes museum-quality mat board as 100% cotton rag, acid-free, lignin-free and buffered with calcium carbonate. Frame Destination accepts alpha-cellulose as well as cotton rag, but not ordinary wood-pulp paper. Photographs are the exception: Passion4Art advises against buffered boards for them.
Choosing Glazing and UV Protection
Glazing is the glass or acrylic in front. Tru Vue says UV exposure over time can fade colors, yellow paper and dull contrast in photographs. The Conservation Center adds that without UV-treated glazing the fading is irreversible, and inks can disappear completely.
The percentages look contradictory until you see who is claiming what. Tru Vue says glazing must block at least 97% of UV in the 300 to 380 nanometer range to count as conservation-grade, with some glazing at about 92% and premium options up to 99%. Frame Destination says plain glass or acrylic blocks about half of harmful UV, while UV-filter glazing blocks at least 98%. Passion4Art puts conservation glass at 99%. Each source is describing its own tier or product, so the useful question is the one on the list: what percentage, measured over what range.
The common choices:
- Conservation glass: 99% UV filtration, according to Passion4Art.
- Museum glass: adds an anti-reflective coating, but Passion4Art calls it the most expensive and says it needs careful cleaning. Tru Vue describes its Museum Glass as pairing conservation-grade UV protection with a nearly reflection-free view.
- Acrylic: Tru Vue describes Optium Museum Acrylic as anti-reflective, 99% UV protective and shatter resistant, suited to oversized work and high-traffic spaces.
No glazing ends the risk. Tru Vue notes that visible light, heat, humidity and pollutants matter too, and advises keeping framed pieces out of direct sun.
Mounting and Backing
Mounting is the quiet part. Frame Destination says not to tape a print's sides to the mat. Archival hinging tape or tissue at a couple of points lets the paper expand and contract. For photographs, Passion4Art says to use photo corners rather than adhesive. Its list of materials to avoid: masking tape, rubber cement, cardboard backing and spray adhesives.
Reversibility is the test. Passion4Art says choices should be undoable by a future conservator without harming the work. At the back, the Conservation Center says acid-free tape encloses the package against moisture and dust.
What Conservation Framing Costs
Passion4Art gave professional price ranges of $150-300 for an 8x10" work and $300-600 for 16x20". That is one framing site's figure, not a local quote, so a shop in Los Angeles, Miami or New York will give you its own. Frame Destination says very valuable art, or art meant to last generations, belongs with a framer trained in conservation framing, and that even museum-grade framing can't protect art forever.
Hanging a Gallery Wall
A gallery wall is several framing decisions made at once, so hold the materials to one standard even if the frames vary. Keep the wall out of direct sun. The Conservation Center says a well-chosen frame keeps viewers from touching a painting, and that glass is worth considering where food and drink are served. Passion4Art suggests an annual check of glazing cleanliness, mat discoloration and the condition of the art, in a room near 68-72°F and 45-55% humidity.
Mat Packets in the Archive Box
The plainest picture of the job comes from the Florida Department of State. A preservation mat packet, back mat, artwork and windowed inner mat, can be stored flat in an acid-free box and stacked with others. The packet, it says, protects the item.
Highlights
What does a custom framer do?
A framer specifies and assembles the layers around your art: mat, glazing, mounting and backing. The Conservation Center calls framing preventative care for items that are hardest or impossible to replace.
What UV protection should framing glass have?
Tru Vue says glazing must block at least 97% of UV to count as conservation-grade, with premium options up to 99%. Frame Destination says plain glass blocks only about half, and sources define tiers differently, so ask the shop for its figure.
What should never be used to mount art?
Passion4Art lists masking tape, rubber cement, cardboard backing and spray adhesives as materials to avoid. Frame Destination advises archival hinging tape or tissue instead.
Sources
- UV Protection in Custom Framing: Why It Matters
- Ask The Conservators: Does conservation-level framing really make a difference? — The Conservation Center
- Preservation Matting & Framing - Division of Library and Information Services - Florida Department of State
- Conservation Framing: Protecting Your Art Investment | Blog | Passion4Art
- How to Frame Your Photos & Prints to Last Longer
