Paver Patio Installation and Cost
How a paver patio is laid from base to joints, what it costs installed, how stone and concrete differ, who is on the hardscape crew, and what to check before you hire.

Put the same six questions to every bidder: how deep they will dig, what goes in the base, how they will compact it, what slope the surface will have, how the edges are held, and what the warranty says when a patio cracks or settles. Jaspector's patio materials guide recommends exactly that, and it applies to pavers, stone or concrete. The surface is what you see from the kitchen window. The answers are what you are paying for.
How Pavers Are Laid Step by Step
Concrete Network breaks paver installation into 10 steps and calls it a job for professional paver contractors, not a casual DIY weekend. Four of those steps are the ones a homeowner can watch from the lawn:
- Base. Before anyone digs, the utility company checks for buried pipes and wires and stakes where they run and how deep. The crew then compacts the soil beneath, and fills with granular gravel in layers no thicker than 4 inches, compacting each one. A finished base normally measures 6 to 12 inches.
- Bedding. A layer of sand, 1 to 1.5 inches, goes over the compacted base. Concrete sand and granite stone dust are both used.
- Set. Steel spikes hold the edge restraints to the base, and those restraints keep the pavers locked together. The crew pulls pavers from several pallets at once so the color blends.
- Joints. Polymeric sand is swept across the surface and a compactor runs over it, again and again until the joints are full.
Soil and Water Change the Job
Whatever city your house is in, the ground under it decides what the crew brings. Clay has to be compacted with a roller or rammer, while sandy soil often needs only a plate compactor. In wet areas and expansive soil, the crew lays geotextile fabric so native soil stays out of the base, according to Concrete Network. Contractor Joan Barton, quoted by Domino, says shifting or moist ground can make a paver patio sink over time. Jaspector adds that all three surfaces need slope away from the house, and that some places require a permit when patio work affects drainage or impervious cover. If your yard stays soggy, ask about the base and the slope before you ask about color.
How Stone and Concrete Differ
This story has a sourced step-by-step for pavers only, so the other two surfaces get a plain comparison rather than a method. Jaspector says flagstone is either sand-set over a granular base or mortar-set over concrete, and the two are not interchangeable, so find out which one your bid describes. It costs more because the labor is slower and stone selection matters, and it needs care with thickness, bedding, joints and drainage. Concrete is often the cheapest choice for a large area, but Barton says it can crack within hours of being laid and cured, and it can turn slippery when wet. On lifespan, Domino puts a properly installed slab at upwards of 25 years, and says limestone, cobblestone and brick pavers can last for centuries with good care. Pavers also win on repair: according to Jaspector, a settled or stained area can often be lifted and reset without tearing out the patio.
What a Paver Patio Costs Installed
Domino reports concrete pavers at $8 to $15 per square foot installed. That is the only installed price in our sources that is clearly like for like, so we are not setting stone or slab figures beside it. Ask each bidder whether a quote covers excavation, base, sand, pavers and joints, or materials alone.
Who Is on the Hardscape Crew
Paver work is typically done by professional paver contractors. The utility company marks what is underground first. Then the crew handles excavation, compaction, base, sand, setting and joints, and the heavy compacting equipment is much of why this is not a DIY project. To find people, CMHA, formed from ICPI and NCMA, runs a Find Products and Contractors directory and a certification program for hardscape professionals.
Hire and Check List
Use this list when the bids come in:
- Get answers to the six bid questions in writing.
- Check the base. For walking areas and home driveways, ASTM D 698 calls for compaction of at least 95% Proctor density, and an ICPI representative says the base stone should match what the state Department of Transportation puts under local roads.
- Look for slope away from the house.
- Ask whether a permit is needed for drainage or impervious cover.
- Treat a very low price with suspicion. Jaspector says it often hides skipped excavation, thin base layers or vague cleanup terms, and a thin or poorly compacted base is what makes a paver job rut or separate later.
- Ask about CMHA certification.
What Barton Says About the Ground
Of everything a contractor like Barton can tell you about a patio, the point she returns to is the soil. Shifting or moist ground can make a paver patio sink over time, she says, which is why the day begins with stakes in the yard marking the pipes and wires, long before any pavers are unwrapped.
Highlights
How much does a paver patio cost installed?
Domino reports concrete pavers at $8 to $15 per square foot installed. Our sources give no installed figure on the same basis for stone or slab.
Which patio surface is easiest to repair?
Jaspector says pavers can often be lifted and reset if one area settles or stains, without demolishing the patio.
What should I ask a patio contractor before hiring?
Ask about excavation depth, base material, compaction, finished slope, edge restraint and how the warranty handles cracks or settlement.
