Blackout Drapes, Dimmers and Quiet Walls for Better Sleep
A dark, quiet, cool bedroom is built by several trades. Here is the work each one does, starting with the drapes.

Interior designer Andrea Hundley has a habit when she dresses a bedroom window: she picks drapes and blinds with a lining of metallic polymer fibers, which bounce heat back out through the glass. That is the most useful single fix in the room, because one order from a drapery workroom works on light and heat together. Light matters more than most people expect. Sleep Foundation points to studies finding that 10 lux or more later in the day can mean more nighttime awakenings and less slow-wave sleep. The rest of the room follows, trade by trade.
Who to Call for Light, Noise and Heat
Here is the order that suits most rooms, with the trade for each job:
- Light: a drapery workroom or interior designer makes the window coverings. Homes & Gardens recommends blackout curtains, shades or heavy drapes for light sleepers and for rooms facing street lights. If you prefer waking to daylight, ask for solar shades or translucent fabric, which filter the sun and keep privacy.
- Light: an electrician fits warm bulbs and dimmers. Ask for bulbs rated 2700K to 3000K, with each layer of light on its own control and a dimmer on it, so the room can fade down gradually. Evening artificial light can delay circadian rhythms and stretch the time it takes to fall asleep, according to Sleep Foundation.
- Noise: an acoustical installer adds a loaded vinyl barrier to the walls. Even low-level noise can nudge a sleeper into a lighter stage or wake them briefly, per Sleep Foundation. The next section covers how it goes on.
- Temperature: an HVAC contractor sets up a thermostat for the bedroom. Sleep Foundation says the room should usually sit between 60 and 71°F, with most experts suggesting the cooler side, and many naming 65°F as ideal because it helps keep core temperature lower. With no thermostat, the fallback is a fan or an open window, depending on the season.
- Temperature: an insulation or finish trade adds warmth in winter, and you manage heat in summer. For winter, Homes & Gardens suggests a wool rug, wall coverings and heavier window treatments. Hot sleepers can keep windows shut by day, open them at night and unplug tech that gives off heat.
Quiet Walls With Loaded Vinyl Barrier
This is not a gut renovation. Homes & Gardens says the vinyl can be installed directly to wood or metal studs, or laid over existing walls and finished over. Where the bed goes helps too: keep it off a party wall so neighbors' sound stays out, and out from under a window, where a draft may disturb sleep.
Tyler Hadley of DDS Acoustical Specialties, an acoustical contractor, said that for existing rooms the easiest fix is a loaded vinyl noise barrier, 1/8 inch thick, added to the walls.
Highlights
What is the first change to make in a bedroom that is too bright?
Hang blackout curtains, shades or heavy drapes. Sleep Foundation reports that light of 10 lux or more later in the day can cause more nighttime awakenings.
What temperature should a bedroom be for sleep?
Sleep Foundation says usually between 60 and 71°F, with most experts suggesting the cooler end. Many name 65°F as ideal.
What bulbs and controls suit a bedroom?
Homes & Gardens advises warm bulbs of 2700K to 3000K, with each light layer on its own dimmer so levels can drop gradually.
